➡️ This is a controller for LED and COB RGBiC strips.

✨ Do you want to create a unique atmosphere in your home? The LC066 LED controller is the perfect solution for you! Thanks to it, you can easily adjust the lighting to your needs, creating unique lighting effects.

✅ We can connect up to 2 5-meter tapes to this device - a total of 8A load.

✅ Tape segments can be freely programmed using the TUYA application or using a dedicated PLD067 remote control.

⭐ Main advantages ⭐

✅ Control via the popular TUYA Smart application from anywhere in the world

✅ Full integration with the PLD067 remote control:Only this remote control ensures the functionality of the controller, enabling precise lighting control

✅The device can wirelessly transmit status to other SD series controllers.Once connected, the values ​​from the main controller are sent wirelessly to the second controller, which allows the use of several controllers while controlling only one of them. At the bottom of the offer we present the operating diagram of the SD series devices

✅Possibility of free programming of up to 20 segments of the LED or COB RGBiC strip in the TUYA application

✅Dimming tape withapplication levelanddedicated remote control PLD067

✅Synchronization of lighting to the rhythm of music(using smartphone microphone)

✅Works with the following tape chips:

TM1809(default), TM1804, TM1812, UCS1903, UCS1909, UCS1912, SK6813,UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, SM16703P ,TM1803, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B(RGBW), SK6812(RGBW), WS2813(RGBW), WS2814(RGBW), UCS8904B(RGBW), LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A, GS8206, GS8208, UCS2904, SM16804, SM16825, SM16714(RGBW), UCS2603, UCS5603, SM16714D, UCS7604(RGBW), UCS7804(RGBW)

✅44 built-in dynamic programs and the ability to create your own

✅Built-in scenes,allowing you to set the right climate

✅Thanks advancedharmonogramom,we have full control over when the tape is turned on!

✅Voice controlvia Amazon Alexa or Google Assistant, only for devices compatible with these systems

✅Control of 16 million RGB colors

✅Remote and automatic control

✅Input/output voltage range 5-24V.The voltage of the power supply must be the same as the nominal power supply of the LED strip

✅Ability to share control of your device with other people on their phones

✅internal memory,which records the settings and returns to the changes recorded beforepower outage or loss

✅An additional communication gateway is not required for the device to function properly, just connect it to your home WiFi router

Be sure to calculate your LED strip power balance before installation!

Application for installation:

1. SPI of single-color MONOs based on a digital system
2. SPI multi-color RGBIC based digital system
3. Multi-color SPI with white RGBWIC based on a digital system

ℹ️ The controller works and is fully compatible with LED and LED COB strips from our offer: LD215 and COB205.

ℹ️ Additional information:

• If the LED strip uses a single-wire control method, the outputs of the DATA and CLK signal lines of the controller will be the same, and up to 4 LED strips can be connected to one controller (meet this condition)
• When the load on the light strip exceeds 8A, the strip should be powered by another power source (the strip and the power supply must have a common phase), and only the DATA/CLK and GND lines should be connected between the controller and the light strip.
• The output power of the constant voltage power supply must be at least 1.2 times greater than the output load, otherwise the full output power of the load may cause the tape to flicker or become less bright

✨ Smart scenes

The application includes several available visualizations and the ability to create your own scenes and freely program tape segments

Various lighting variants are available in scene mode, including: for work, study, relaxation and much more. Ready-made presets allow you to create the right atmosphere through appropriate color exposure, temperature and tape sequence

ℹ️ Tape programming in the application:

• In the application, the tape is fixed at 20 segments
• We divide the tape length (total number of pixel points) by 20 segments. We will then get the number of pixel points per segment
• The maximum length of the tape is 1000 pixels
• Example: a 5-meter long tape consisting of 60 pixels per meter - then we set the length in the application to 300 pixels. The whole tape is divided into 20 segments and each segment contains 15 pixels
• When the length of the lightstrip is less than or equal to 20 pixels, each pixel corresponds to the next segment from the beginning of the lightstrip
• When the tape length is not a multiple of 20, the rest of the tape will display the color of the last segment
• When the actual length of the lightstrip is not a multiple of 20, it is recommended to set the length to a longer length and increase the value to a multiple of 20
• When the set length of the strip light is less than the actual length, the end part of the strip cannot be controlled
• When the selected duty cycle interval in dynamic mode is too long, please re-set the correct pixel length
• When the static or dynamic color display mode is not consistent with the application interface, please reselect the light strip color sequence

✔️ Music sync

Music mode will light up the room with your favorite rhythms. Using a mobile device - the TUYA application will activate the microphone and capture the tempo of the music being played, creating amazing visualizations.

• Adjusting the lighting to live music

⏰ Schedules

Thanks to the TUYA Smart application, you can set schedules according to your preferences and daily routine. Set the device to turn on and off according to your needs and save on electricity!

• Turn devices on or off using schedules or automation

✨ Create an extremely advanced lighting system with the SD series!

The device can wirelessly transmit status to other SD series RGBiC controllers. Once connected, the values ​​from the main controller are sent wirelessly to the second controller, which allows the use of several controllers while controlling only one of them. Below is the operating diagram of the SD series devices.

✔️ Connectivity with various light sources:

ℹ️ Dimensions:

Basics of the ZigBee protocol:

• The ZigBee protocol operates on the 2.4 GHz frequency, which propagates well in buildings
• ZigBee connectivity is MESH connectivity, which means that each ZigBee device with full L+N power works as a signal amplifier for other devices. If a remote sensor does not have communication with the ZigBee gateway, it is enough that it has radio communication with another ZigBee device with full L+N power that has communication with the gateway (up to a maximum of 3 devices). The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection
• Devices using the ZigBee protocol connect to the control panel in 0.2 seconds in the event of a state change, and WiFi takes about 5 seconds to connect to the network after a state change. ZigBee devices have a huge advantage when it comes to automating smart rules
• On a WiFi network with 25 devices you will start to experience network problems. You can easily add over 50 devices to the ZigBee hub
• The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved months ago
• ZigBee communication consumes very little energy, which gives a long battery life.

ℹ️ Specification:

• App:TUYA Smart / SmartLife
• Communication:WiFi 2.4 GHz + RF 2.4 GHz (SD series only)
• Pilot communicationsRF: 2.4 GHz (seria SD)
• Power supply:5-24V
• Maximum current:8A
• Support up to 1000 pixels maximum
• Temp. work:-30°C ~ 55°C
• Tightness class:IP20
• Dimensions:114 × 38 × 20 mm

ℹ️ The set includes:

• COB SPI NEON RGBIC LED Controller lighting SD ZigBee + RF TUYA Series
• Instruction
• Packaging

Product code: LC066