MAKITA screwdriver UDAROWA 1/4" 180NM 18V LXT 5.0Ah

Наша компания не является производителем бренда Makita, его уполномоченным дилером или официальным представителем в Эстонии.

Cordless impact driver/driver with 1/4" drive Makita [DTD173RTJ]:

• Impact screwdriver with electronic 4-speed speed switch and 4 automatic operating modes:
  - "A" operating mode - in this mode the tool starts rotating at low speed, then activates the impact and increases the speed until it reaches maximum speed,
  - "T" operating mode for thick sheet metal - a special mode for optimal and fast driving of self-drilling screws,
  - "T" operating mode for thin sheet metal - the screwdriver automatically stops after 3 strokes,
  - screw mode:
  - during reverse rotation - stops the impact and reverse rotation within 0.2 s from the moment the screw or nut is sufficiently loosened,
  - when unscrewing - the switch trigger stroke required to reach maximum rotation speed is reduced to 1/3,
• has the ability to change the operating mode using an additional switch located above the main switch,
• high torque - 180 Nm,
• is equipped with a brushless direct current motor - BLDC,
• manufactured using XPT technology, which provides increased resistance to dust and moisture,
• has a speed controller,
• right/left turn and brake,
• The screwdriver has an LED light ring with 3 levels of brightness adjustment,
• has an ergonomic handle covered with elastomer,
• does not work with BL1811G, BL1813G, BL1815 (18V/1.3Ah) and BL1815G batteries (without electronics),
• The screwdriver comes with 2 batteries and a charger, packed in a MakPac system case.

TECHNICAL DATA OF THE MAKITA HITCH DRILL [DTD173RTJ]:

• supply voltage : 18V,
• Battery type : lithium-ion,
• Supported batteries : 1.5 / 2.0 / 3.0 / 4.0 / 5.0 / 6.0 Ah,
• idle speed:
  - 1st gear : 0 - 1100 rpm.
  - 2nd gear : 0–2100 rpm.
  - 3rd gear : 0 - 3200 rpm.
  - 4th gear : 0 - 3600 rpm.
• stroke rate at idle:
  - 1st gear : 0 - 1100 / min.,
  - 2nd gear : 0 - 2600 / min.,
  - 3rd gear : 0 - 3600 / min.,
  -4th gear : 0 - 3800 / min.,
• standard screws M5 - M16,
• machine screws M4 - M8,
• high tensile bolt : M5 - M14,
• maximum torque:
  - 1st gear : 20 Nm,
  - 2nd gear : 50 Nm,
  - 3rd gear : 170 Nm,
  - 4th gear : 180 Nm,
• tool holder: 1/4 inch hexagon
• sound power level: 108 dB(A)
• sound pressure level: 97 dB (A)
• Noise level: 3 dB (A)
• dimensions : 111 x 81 x 234 mm,
• weight with battery : 1.2 - 1.5 kg

IMPACT DRIVER MAKITA [DTD173RTJ] EQUIPMENT:

• 2 BL1850B batteries (18V / 5.0Ah) [ 632F15-1 ],
• DC18RC charger [195584-2 ],
• belt holder,
• M4x12 screw,
• Makpac system housing type 2 [
  821550-0 ],
• Makpac suitcase liner [
  837670-0 ]
  ,
• user manual.

User manual: https://www.icmsmakita.eu/CMS/custom/fi/attachments/user_manuals/User_manuals_EU3/DTD173.pdf

Declaration of Conformity: https://www.icmsmakita.eu/CMS/custom/fi/attachments/ec_declaration_conformity/DTD173.pdf

Service diagram: https://www.icmsmakita.eu/CMS/custom/fi/attachments/part_drawings/EN/DTD173.pdf