Behringer CLOCKED SEQUENTIAL CONTROL MODULE 1027 - legendary analog step sequencing module in eurorack formatClassic analog sequencing module from 1970 mAauthentic recreation of classic "2500" series circuitsThe module consists of an integrated eight-stage circuit and three voltage control channels (A, B and C). Built-in generator, based time interval settings, allows the sequencer to perform steps automatically Each line has an LED indicator to show the number of steps Illuminated button used to start and stop the internal clock Clock rate can be adjusted from 20 steps per minute, up to 400 steps per second using PRF (Pulse Repetition Frequency) or external control signal. The internal clock can be turned on or off by sending pulses to the corresponding channel. The clock pulse width and the length of one step voltage can be adjusted from 0 to 100% using a pulse width potentiometer and an external control signal. In the clock off mode, the sequencer can move to the next steps and reset waveform manually using the front panel buttons. Voltage range on channels A, B and C from 0 to 10 V1027 can be used to control other 2500 series devices including 1026 preset voltage or 1050 mix sequence modules Cable connections are on the back of the PCB (cables are included)Eurorack technical data: 26 HP, 50 mA +12 V, 30 mA -12 V
