Kõik toote kohta
Eight-zone LX strip, wired and wireless with built-in WIFI STLXWH module Wired electric actuator controller to control underfloor heating. The LX WiFi band is used to control thermoelectric actuators mounted on valves. In a mixed system, the band also controls wireless electric actuators STT-868 or STT-869. Why LX WiFi? Rational thermal energy management Fully adaptable to your needs and daily activities Possibility of establishing wired or wireless connection between devices New wired connection with dedicated RS 485 devices Integrated WiFi internet module Remote control via the eModul program How does it work? The LX WiFi bar is a device that allows you to control up to 50 electric drives, control the heating device, cool the surface and control the floor pump. The mixing valve can be controlled using an additional module. Thanks to conscious control, thermal comfort will be maintained in the premises without excessive energy consumption. The remote control panel L-X WiFi strip is adapted for remote control of the device through the eModul application due to the integrated WiFi. Many possibilities Thanks to the radio module built into the L-X WiFi strip, there are many possibilities for the communication of the entire system. The connection between measuring devices (sensor or regulator) can be wired or wireless. Device operation modes The L-X WiFi device can operate in one of four different modes: normal mode vacation mode economic mode comfort mode Weekly work schedules In each zone the user can set 6 weekly schedules: 1 local, 5 global .Local schedule - assigned to one zone.Global schedule - all zones have the same set temperature values.In addition to schedules, the user can set a constant set temperature value or one that will be applied only at a precisely set time. thanks to the function, we can also control surface cooling. To control such work, regulators with an air humidity sensor are useful. Technical data: Supply voltage: 230V ± 10% / 50 Hz Maximum energy consumption: 5W Ambient temperature: 5 ÷ 50°C Maximum voltage output load: 1-8 0.3AM Maximum pump load: 0 ,5ANom. Contact load without voltage:- 230V AC / 0.5A (AC1) *- 24V DC / 0.5A (DC1) **NTC sensor temperature resistance: -30 ÷ 50°C Operating frequency: 868MHz Fuse insert: 6.3A* AC1 loads category: single-phase, resistive or slightly inductive AC load.** DC1 load category: direct current, resistive or slightly inductive load.
