Gosat UNI-T Current Measuring Clamp UT203R CATII, CATIII, with voltage, resistance, frequency measurement, diode testing functio

UNI-T UT203R Current Measuring Pliers

The UT203R current measuring pliers are used to measure alternating and direct current voltages up to 600 V, alternating and direct current currents up to 600 A, and frequencies from 10 Hz to 60 kHz at low voltage levels up to 600 V and from 10 Hz to 10 MHz at medium voltage levels. All ranges have protection against voltages exceeding 600 V and audible and visual signaling. A four-direction multi-segment 37 x 25 mm display with backlighting and a fast refresh rate (3 times per second). The jaw opening allows measuring cables up to 28 mm in diameter. A non-contact voltage detector (NCV) allows detecting live conductors with two sensitivity levels - EFLo and - EFHi, designed for LV 110V/50/60Hz and 230V/50/60Hz wires. The included probe - a probe tip cover on the test leads allows measurements in CAT III category low voltage distribution lines without the risk of arc flash. Without tip covers, test leads can only be measured on CAT II category low voltage distribution lines. The power source consists of 2 pcs. 1.5 V R03 batteries. The meter's power consumption is about 1.8 mA. The meter has an automatic power-saving function. In sleep mode, it consumes <11 μA, effectively extending battery life to approximately 400 hours.

Product parameters:

- High voltage, current, and frequency measurement up to 600 V
- Frequency measurement from 10 Hz to 10 MHz
- Capacitance measurement from 6nF to 60mF
- Temperature measurement from -40 to +1000°C
- Proportional (relative) voltage and capacitance measurement
- Multi-segment display and audible/visual signal
- Protection against voltages exceeding 600 V in all ranges
- Non-contact detection of live conductors
- Automatic range switching

DC voltage: 400mV/4V/40V/400V/600V;
AC voltage: 4V/40V/400V/600V;
DC current: 40A/400A; AC current: 40A/400A;
Resistance: 400 Ohm/4 kOhm/40 kOhm/400 kOhm/4 MOhm/40 MOhm; Frequency 10Hz - 1MHz;
Pliers jaw opening 28mm.