Loading...

Oglekļa monoksīda un dabasgāzes detektors 2in1Eura CGD-50A2
Oglekļa monoksīda un dabasgāzes detektors 2in1Eura CGD-50A2

Produkta tonis un faktiskā krāsa var atšķirties no attēlā redzamā, jo attēli ir ilustratīvi. Produkta apraksts ir vispārīgs un, iespējams, tajā nav iekļautas visas produkta īpašības.

Oglekļa monoksīda un dabasgāzes detektors 2in1Eura CGD-50A2

47,63 €
Ikm. maksa no 2.13
3017445

36029

5905548278186

Šī prece nav vairs pieejama

Šī prece Jūs ieinteresēja
(Lasīt pakalpojumu sniegšanas noteikumus)
2 in1 CGD- 50A2Eura CGD-50A2 is used to continuously monitor the presence of carbon monoxide and natural gas in the air, and to determine the maximum safe concentration of these gases and to warn about it. It does not require any additional devices for proper operation, and one free power outlet is enough to connect it. Forest size, in one case. 2 separate, technologically advanced sensors are used here - a semiconductor sensor responsible for gas detection and an electrochemical sensor that detects carbon monoxide. The electronic control system allows you to achieve a high level of detection at a relatively low cost and low energy consumption. Upon finding a dangerous concentration of carbon monoxide or gas in the air, the device generates an audio and optical alarm signal. The CGD-50A2 cool and gas sensor is installed in a room where there is a risk of dangerous concentrations of heated or leaked natural gas. When choosing its location, it should be taken into account which potential risk is most likely. in order to control the premises: carbon monoxide - the device is installed at head height (for example, the installation height in the bedroom is approx. 0.7 m, and in the living room 1.5 m from the floor). natural gas - the device should be installed above 1.5 m above the floor. When choosing a place to install the CGD-50A2 cold and gas detector, make sure that a possible sound signal can be heard from other rooms of the building. Attention!Besides, each copy of the Eura CGD-50A2 detector was individually tested in a Polish laboratory, in a special chamber with an optical and acoustic alarm. , caused by carbon monoxide in the atmosphere. The alarm is activated in less than 3 minutes at a measurement concentration of 300 hours (the number of carbon monoxide molecules in 1 million air molecules). Technical specifications: Sensor: Supply voltage 12 - 24 V DC. ~ + 38oCCompliance with standard EN50194-1: 2009 / EN50291-1: 2018 Sensor dimensions (W x SZ x D) [...]