Rozbudowany fan controller and RGB lighting company LamptronKontroler controls a maximum of four fans with PWM control or RGB lighting with digital diodes. The LCD display is connected to the PCI slot. Do zamocowania displaya przypowe są trzy wolne gniazda ramki. The control board is controlled by the attached pilot on the podczerwień. The control board for fans and LED RGB lighting Practical LCD display with temperature, voltage and speed indicators Designed for synchronization with the main board or another RGB controller Four channels for fans with or without PWM and a power of up to 25 watts per channel for up to 60 addressable digital diodes LED ARGB (5VDG)Cztery gniazda na maximum 60 diods LED RGBCztery gniazda na temperature sensors, 4x sensor w setzewieZasilany przez 4-pinowy Molex i SATA Convenient control thanks to pilotiMaximum control Sterownik Lamptron RF625 offers never-limited control over fans and lighting RGB . Przy mocy do 25 watów na kanal nie ma ograniczeń. The fan controller supports both fans with and without PWM. Power supply is provided via 4-pin Molex connector. A maximum of four fans can be connected to the board controller. Additionally, four digital addressable 3-pin devices RGB (5VDG) can be connected. In addition, the required power supply is delivered via the SATA connector. Four temperature sensors can also be connected to the printed circuit board. There is an LCD display and a pilot on the podczerwień. The speed of the fans is controlled using the supplied pilot. In addition, the lighting system is set up using the pilot. The Lamptron RF625 can be connected to the main board or another RGB controller using the included cable, enabling the synchronization of RGB and ARGB lighting with external control devices. housing, Lamptron was equipped with a stylish display of ciekłokrystaliczny. It is connected to three free PCI sockets.
