LED wall panel white, 4 zones RGB+CCT LED RF SD series

➡️ Wireless wall panel (SD series) for controlling RGB+CCT LED lighting (up to 4 zones). It allows you to turn on/off, dim, select color (RGB), turn on white and adjust the color temperature.

☑️ 2.4 GHz radio communication (range up to 30 m with the possibility of extension). Powered by a 3V CR 2023 battery with energy saving mode.

☑️ Elegant glass panel (9.5 mm thick) for easy wall mounting.

ℹ️ Attention! The panel is compatible with SD Series devices ("SD Series" in the name).

⭐ Main advantages ⭐

✅ Support for colorful RGBCCT LED lighting installations from the SD series

✅ The remote control supports 4 lighting zones

✅ Slim design - only 9.5 mm thick

✅ Possibility to assign multiple SD series LED receivers to the remote control

✅ Smooth dimming control without visible jump effect

✅ 2.4 GHz radio communication - SD series

✅ The panel is paired by pressing the numeric zone button

✅ The range of the remote control is approximately 30 meters (in open space) + range extension (possibility of retransmission between LED receivers)

✅ Controller powered by CR 2032 battery (not included)

✅ Panel made of glass

✅ Quick, easy assembly and installation

ℹ️ Description of the panel operation

1.Enable/Disable all lighting zones.

2.Setting from 10 brightness levels.

3.Press to change the static RGB color.

4.A short press activates the next dynamic mode, a longer press for approx. 2 seconds activates the mode changing cycle.

5.Press briefly to obtain white color and to adjust the color temperature. Longer pressing from 1 to 6 seconds sets the brightness.

6. For dynamic mode, short press gives 10-level speed adjustment. A longer press for 2 seconds restores the default speed.For RGB static modea short press gives 11 levels of saturation adjustment. Longer pressing from 1 to 6 seconds smoothly regulates the saturation level.

7. Pressbriefly to turn on the lighting zone. Longer pressing for approx. 2 seconds turns on the lighting zone. A short, quick press on several zones at once will activate them simultaneously. One panel can control many SD series receivers.

ℹ️ Button combinations

1.Zone + Brightness. holding for 2 seconds sets the zone as single color.

2.Zone + Middle. Holding for 2 seconds sets the zone as two-color.

3.Zone + MODE. Holding for 2 seconds sets the zone as RGB/RGBW.

4.Zone + SPEED. Holding for 2 seconds sets the zone as RGB+CCT.

5.Switch + Brightness. Holding for 2 seconds sets all zones to single color.

6.Switch + Brightness. Holding for 2 seconds sets all zones as two-color.

7.Switch + Brightness. Holding for 2 seconds sets all zones as RGB/RGBW.

8.Switch + Brightness. Holding for 2 seconds sets all zones to RGB+CCT.

✨ Create an extremely advanced lighting system with the SD series! ✨

➡️ Look for other remote controls, controllers, relays and dimmers in our SD series offer.

ℹ️ Dimensions:

ℹ️ Specification:

• Remote control intended for lighting installationsRGB+CCT (colorful RGB LED strips with white temperature control)
• Lighting control system:PWM
• Lighting control method:radio (2.4 GHz - SD series)
• Number of supported zones/channels:4 zones
• Power supply:1x 3V CR2032 battery (not included)
• Communication type:one-way
• Remote control range:up to about 30 meters in an open area (possibility of retransmission between LED receivers)
• Working temperature:from -30 to + 55°C
• Tightness class:IP20

ℹ️ Dimensions:86 x 86 x 9,5 mm

Mounting hole spacing:60 mm

ℹ️ The set includes:

• Panel
• Mounting bracket

When product: PLD073