RAM-ageddon 2026: miks sinu uus telefon ja konsool 100 € kallimaks läksid Laadimine...
RAM-ageddon 2026: miks sinu uus telefon ja konsool 100 € kallimaks läksid10.07.2026 89
Nutitelefone anda koos tehisintellektiga: kes juba müüb, kes kuulutab 22. juulil - ja miks Apple alla andis04.07.2026 81
Intel on sisenenud käesolevatesse konsoolidesse - AMD ei ole enam ainus04.07.2026 73
Apple tellis 10 miljonit volditavat iPhone Ultrat — meedia05.07.2026 51
329 eurot, 5200 mAh ja tarkvaratugi 2032. aastani — mida Nothing Phone (4b) tegelikult pakub09.07.2026 51
Сумма лизинга: 488.99 €
Frog Cut & Pay | |
Esto lease | |
LHV | |
| | |
Inbank | |
Montonio |




















Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
2268099 LEC-URZ3437
5901890095501
Toodet pole enam laos
Saadaval alates:
Although the voltage in Poland is 230 V, there are often situations where it is unstable. This can cause sudden shutdowns or unstable operation of devices, which shortens the life of electronic devices. Therefore, in order to protect yourself from this type of situation, it is worth purchasing an automatic voltage stabilizer KEMOT PROavr-10k.

In single-phase mode, each phase can operate independently of each other. Regardless of network load and output voltage fluctuations, the KEMOT PROavr-10 stabilizer maintains them at the 230 V -3% level, allowing efficient operation of all devices, including those sensitive to the quality of the network voltage. The regulation is automatic, ensuring high accuracy of the output voltage. An error in the operation of one of the phases does not affect the operation of the others.

In three-phase mode, it is important to maintain a balance between the phases. The stabilizer monitors and controls the voltages of each phase to ensure they are matched - it will compensate for too high or too low an input voltage and provide an output voltage after stabilization. In this mode, if one of the phases does not work properly or is not connected, the device will activate the protection and will not supply voltage to the output, informing about it with the "PHASE ERROR" indicator.

The voltage stabilizer KEMOT is a device whose task is to maintain a set voltage of 230 V at the output. Its task is to increase the too low or decrease the too high input voltage so that the output voltage is within the permissible limits. and does not have any spikes dangerous to the connected devices.energy. The design of the stabilizer is based on a toroidal transformer, which ensures stable operation of the device.

The voltage stabilizer KEMOT PROavr-10 maintains the voltage with an accuracy of up to 3%. This high operating accuracy is the result of using servo-based technology.

The device also has a "bypass" function, that is, a switch that bypasses the operation of the stabilizer, allowing it to be isolated, allowing it to power the home network from an external source without problems.

If you need a voltage stabilizer for devices with a large instantaneous starting current, choose a model with the DELAY function. The KEMOT PROavr-10 is equipped with a DELAY switching delay button, ranging from 6 to 180 seconds, which will reduce the risk of its damage when the devices connected to it have a high instantaneous starting current. In addition, the stabilizer KEMOT PROavr-10 has protection against too high and low voltage, overload, overheating and short circuit.

To make it easier to move and place the KEMOT stabilizer in the right place, it has four sturdy wheels. Thanks to them, you will be able to freely transport the device to different places, which will certainly facilitate operation and maintenance.

KEMOT PROavr-10 can be used both at home and in the office. Fits well: